Rorleje / Rudder bearing
Som det ses på tegningen til venstre, sidder der indvendig i lejet 2 styk O-ringe, en foroven og en forneden. Ringene måler indv. ø31 x 3.2mm og bør skiftes hvis rorret alligevel er afmonteret. For at sikre mod indtrængning af vand, bør lejet fyldes med fedt inden hver søsætning.
As
seen on the drawing at left, the bearing is provided with O-rings, one at
the top and one at the bottom. The rings measure inwards ø31 x 3.2mm and
should be replaced if the rudder is demounted. To ensure no entering of
water, the bearing ought to be filled with grease before every launch.
06/2005